Henry V Events of Portland, OR, an event handler for the adidas brand, contacted Enhance a Colour (EaC) for help in producing a continuous-tone (photographic) double-sided fabric print and frame system for an adidas marketing show.

Artwork was received at 6:00 pm on a Wednesday, and the job was to be delivered to the west coast for a Saturday event. EaC printed two16 ft. wide dye-sublimation-printed fabric graphics which were then sewn together as a large pillowcase with a bottom Velcro closure.

While the fabric visuals were being printed, EaC’s metal fabrication department created a 2 in. thick pop-pin aluminum frame system that measured 24 ft. W x 13 ft. H, over which the fabric would be fitted.

The complete fabric and frame system is assembled and taken down in less than 10 minutes, using only an Allen key.

Challenge: A continuous-tone (photographic) double-sided fabric and framing system for a marketing show, delivered in less than three days

Solution: EaC printed two seamless 16 ft. wide dye-sublimation-printed fabric graphics which were sewn together as a large “pillowcase” with a bottom Velcro closure. While this fabric was being printed, EaC’s fabrication department created a 24 ft. x 13 ft., two-inch thick, pop-pin aluminum frame system over which the fabric would be fitted. The complete fabric and frame system could be assembled and taken down in less than 10 minutes, using only an Allen key.

Date: December 2014  |  Job #: 25639  |  Client: Henry V Events  |  Secondary: adidas  |  Location: Portland, OR

Share This Story, Choose Your Platform!